Stereo mix/input monitor sound option
The advice note below states "is mainly for users who need to use legacy Audacity 1. The xpcp anchor is mandatory while Audacity officially supports XP. My Forum dissuasions about it are only about security, nothing else. The Mac section is outdated and could be moved to Mac OS X or whatever becomes of that. I've rewritten the Linux section to be relevant to current Audacity, but Steve can check it over. That Linux section can then be moved to Linux Issues.
In current Audacityall available inputs are selected in Device Toolbar or Devices Preferences. However one of the common problems encountered with the Mixer Toolbar in legacy Audacity 1. The purpose of the selector as with Device Toolbar was to link to the current mixing device assuming this device offers a choice of input sources and thus save the user going through a series of system menus to choose the source.
It is often assumed that Audacity controls the input sources displayed, but in fact the sources offered are governed by the drivers of the sound device that is currently selected in the Audacity Preferences. Drivers are a big issue on Windows machines, and it often happens that machines purchased new will only be supplied with generic Microsoft drivers. This may prevent the audio device linking properly to the system mixer, so you may end up always recording from line-in, or cannot apparently record at all whatever input source you choose.
Another issue may be that you won't see all the inputs that your device potentially offers. Find out what inputs are available and ensure that the playback and recording devices are explicitly set to the correct device you want to use.
How to Enable “Stereo Mix” in Windows and Record Audio from Your PC
For example you may have multiple sound devices such as built-in sound and an external USB device, so you need to choose between them. If you are on Windows and experiencing problems, choose your sound device explicitly, not Microsoft Sound Mapper which is intended to map to the currently selected default Windows sound device, but may not always do so correctly. Note that some sound devices have individual analog to digital converters ADC's for the different inputs such as microphone and line-in.
Where this is the case, these inputs are treated as separate recording devices on Windows for example, "Line-In: These inputs can be most conveniently selected in Device Toolbar in current Audacity but in legacy Audacity before 1. Note that if your selected recording device is a USB or Firewire device, these normally do not have multiple input sources to choose from, so Device Toolbar or Preferences will only list the device as a single choice and the input selector in legacy Audacity will grey out.
This is normal, and just means that input choices must be made in the device itself, or in any control software that comes with it. Examples of devices which will normally not allow input selection in Audacity are the Griffin iMic, USB turntables or USB cassette decks and a wide variety of USB and Firewire mixers and interfaces. Multi-channel recording devices do allow limited input channel selection in Audacity where the drivers support this, though only a few devices on Windows allow recording more than a pair of two channels at once unless you compile Audacity with ASIO support.
Also check your sound device is not already in use. If you are on Mac or Linux and the sound device is already being used by another application, Audacity may not be able to access it for recording. As a result, Device Toolbar, Preferences or the legacy Mixer Toolbar input selector may be empty of devices.
Generally, this is not a problem on Windows as long as you choose MME host in Audacity, though issues with some applications are known. For example, speech recognition in Word, Skype or the Fraps screen capture software may prevent other applications from using the sound device to record from a microphone.
If you've got this far and the problem is not solved, go to the appropriate section below your operating system:. Some high-end multi-channel cards on Windows systems don't use the standard Windows mixer interface and volume control, but instead supply a custom mixer application which Audacity can't hook in to. In these cases you need to select the recording settings and levels using the custom mixer application shipped with the soundcard.
Recording should work as normal with the card however. The most recent Windows operating systems Vista and later treat individual recording sources such as line-in, microphone and "stereo mix" as recording devices in their own right. As a result, in legacy Audacity 1. If you absolutely need to use 1. To do this, right-click over audacity. This isn't a generally recommended solution. In current Audacity, recording devices can also be viewed in Device Toolbar.
Here is an example of recording inputs in Preferences for two different physical devices an inbuilt sound device and an external USB soundcard:. If selecting a particular input does not work, or you don't see the input you want, try selecting it in the Windows Control Panel see the next section below.
If the computer sound device itself has an input for recording sounds forex trading in glasgow computer is playing, it can go by various names such as: The exact name and whether you have such an input depends on the drivers of your sound device. Worse, this input source is often hidden by default in the system mixer. Sometimes stereo mix/input monitor sound option Mix" can only be made to work by using the control panel supplied by the soundcard manufacturer - this is often reported with RealTek inbuilt sound devices.
Try launching the sound device control panel from the Windows Control Panel or the system tray by the clock. If you see a volume control for Stereo Mix, try clicking to select it.
Confusingly, some RealTek devices "select" an input by muting all but one, so in this case, mute everything except stereo mix. If you don't see Stereo Mix, click the wrench icon and enable Stereo Mix in the dialog that pops up.
No sound coming through 'stereo mix' device - TechSpot Forums
In some RealTek versions the option to check is "Enabled recording multi-streaming". You should now see a volume control for Stereo Mix.
Remember to select or unmute it as above. See this Forum topic for more help with RealTek. Be aware that on some machines, the "Stereo Mix" option will never work because it is disabled internally by the driver settings due to copyright concerns.
This is a known issue with Lenovo Thinkpad laptops, but sometimes editing the driver files can enable stereo mix. If all else fails, you can connect a cable from the line-out green port of the computer to the line-in blueand choose the line-in as recording source. If you need to hear what you're recording, you can buy a single stereo to double stereo adaptor that will give you a spare jack to plug the speakers into.
Alternative suggestions follow below. Research report karachi stock exchange is common on Vista and later that not all recording inputs are automatically enabled in the main Recording tab. This means they are invisible in that tab, and also invisible to recording applications like Audacity. So you need to make them visible, then enable and make default the main one you want to use, following the ft ludacris maker money pharrell below.
Windows sound settings are often optimised for VoIP internet calls or video conferencing using applications such as Skypebut these settings can interfere with how to get free money in the simpsons tapped out quality microphone recordings of music.
Now choose the main Playback tab if you are not already there. Right-click over forex trading in glasgow desired "Speakers" or "Headphones" sound device and if visible, choose "Set as Default Device".
If the right-click menu also shows "Set as Default Communication Device", choose that as well, then by default all applications will use that device. Right-click over your desired device again, choose Properties then the Advanced tab, and set Default Format to a stereo choice with the same sample rate you chose in step 6. To ensure the soundcard does not add unwanted playback or recording sound effects like "Cathedral" or "Closet", look for LevelsCustom or Effects tabs and turn off all effects that are not required.
Click "OK" as required to close Windows "Sound". Now open the Windows Control Panel and look for any control panel that the sound device itself may have.
Make sure again that no unwanted effects are being applied. Audacity restart and settings. First, click on the Audio tab, and in the "Sound Recording" panel, select the correct "Default device" from the best real estate investment options in bangalore list and click "Volume":.
Note that input sources are sometimes available to use, but hidden. Select your sound device in the Mixer Device broker stock market india, and ensure all the boxes in the window below are checked:.
If the input you wanted was in the Windows list, it will now be available to select in Audacity. If the input you want cannot be made available or made to workor if you want the convenience in legacy Audacity 1. There are a few possible causes of this. If only "default" or "sysdefault" devices are available in Device Toolbar, you can select the required devices in Stereo mix/input monitor sound option. If Audacity's Mixer Toolbar output and input level sliders are missing their hover tooltips and grayed out on zero volume or have no audible effectthen Audacity has been built without PortMixer support.
See Compiling Audacity for Beginners for help. If Audacity's Mixer Toolbar input slider is grayed out on maximum volume, this means Audacity cannot control the system input slider for the input device selected in Device Toolbar. Use the system mixer instead to adjust the input volume of the device.
Mixer Toolbar Issues From Audacity Wiki. ToDo-2 Potentially this trade vanilla options could be deprecated?
Gale wrote of this page in an email on 14Mar Perhaps that means we just leave the page "as is" for sending a copy to a legacy Wiki? The Windows sections for the control panels vistacp and xpcp are linked to every day from Forum answers. A fair point Gale - but is it linked to for users of current Audacity or users of obsolete versions? If it's for current version users than this page could be moved to the manual - the obsolete legacy users can be pointed to the parallel page in the Legacy Wiki - that is what the Legacy Wiki is for, supporting obsolete users surely.
I would suggest leaving this page as is for the legacy wiki, and severely trimming it down for the current wiki. My impression is that if we remove the information that no longer applies, then the "Alerts" for modern Windows can be moved into the normal text flow. The "Windows Control Panel" section is very heavily linked to on the forum, though could perhaps be updated to put more emphasis on using WASAPI for recording sounds playing on the computer and much less emphasis on "Stereo Mix".
My point here is that this looks like an entirely legacy page and can thus be deleted from current Wiki. Or am I wrong and there are sections of this page that should remain for current Audacity users? And I'm not sure why we're still talking about XP now that Microsoft have discontinued support. It is some thing that imo we should actively discourage as Gale does on the Forum. I changed this to PS. As Steve says, the vistacp and xpcp anchors here are linked to every day to give support for current Audacity.
My suggestion is that this page becomes a Windows-only page called "Windows System Mixer" though if we want to move the page, the xpcp and vistacp anchors will need redirecting in the. I will need to go though the page above the Windows Control Panel sections and see what if anything to retain so please don't just delete that content. I transferred the Mac section to Mac OS X as Gale suggests. I have asked Steve to take a look ot the Linux section.
This page contains important information for users of current Audacity on Windows about enabling inputs in the Windows Control Panel. Note that on Windows VistaWindows 7 and later, initial driver setup typically disables all the inputs except for the built-in microphone. It is strongly recommended to use the Sound Control Panel to show and enable all disabled devices so that recording applications like Audacity can see them. For Windows Vista and later it is particularly important that you use current Audacity otherwise Audacity may crash when you stop recording.
In current Audacity, all input devices are conveniently located in Device Toolbar. We strongly suggest you obtain the current version of Audacity then read our further information about Windows 10Windows 8Windows 7 and Windows Vista. HELP WITH RECORDING COMPUTER PLAYBACK OR STREAMING AUDIO On Windows 10Windows 8Windows 7 and Windows Vista current Audacity can record computer playback even on sound devices lacking that ability. To use that feature, choose "Windows WASAPI" host in Device Toolbarthen the output device you want to record from, then the "loopback" input for that device.
This "loopback" device does not need to be enabled in the Windows "Sound" control panel. For details, see Recording Computer Playback on Windows. All the settings below are specific to each recording or playback device.
Stereo mix with Ubuntu 10 - Audacity Wiki
Therefore after enabling, making default and adjusting settings for your main recording and playback devices, it is best to enable and adjust settings for each other device you want to use.
Alternative settings if crackly recording or playback occurs, or if recordings made while playing other tracks are not synchronized: Click the "Advanced" tab, then put a checkmark tick in both Exclusive Mode boxes. Choose the main "Playback" tab then right-click over your chosen playback device, choose "Properties," click the "Advanced" tab and similarly enable both Exclusive Mode boxes.
In Exclusive Mode, the sample rate selected in "Default Format" no longer applies, so be sure at bottom left of Audacity to choose a project rate that your device supports. This Control Panel applet is called "Sounds and Multimedia" in Windows and ME, and "Multimedia" in Windows 98, so looks slightly different to the image below. Retrieved from " http: Views Page Discussion View source History. Personal tools Log in. Navigation Wiki Home Page Tutorials Tips Feature Requests Release Notes Index of all pages Help.
How to record from speakers to include media player or game audio AND the microphone in Windows 7 - CamStudio Support Forum
Useful Links Help us with Bug Lists Audacity Manual Audacity Forum. For Developers Developers' Wiki Developer Guide Audacity Architecture Proposals Feature Requests Bug Lists Wording Next Release. Toolbox What links here Related changes Special pages Printable version Permanent link. Contents 1 Mixer Toolbar issues and input device selection 1. On Windows 10Windows 8Windows 7 and Windows Vista current Audacity can record computer playback even on sound devices lacking that ability.